2022年3月13日星期日

Reasons for Power Consumption in Electric Arc Furnace Steelmaking

Electric Arc Furnace Steelmaking

Reasons for Power Consumption in Electric Arc Furnace Steelmaking


1. Raw Material.

As we all know, the steel used for electric arc furnace steelmaking is scrap steel, because the raw materials required for electric arc furnace steelmaking are light and thin materials, pressing blocks, etc., which will result in high temperature and shutdown when feeding, so the heat loss will be very large. If one charge is insufficient, it will need to be fed again, or even three times, which will cause a lot of heat loss. A large amount of power consumption is required for each charging. It is also worth noting that C and P are higher after the raw material is cleaned up. When entering the oxidation period, C and P removal also takes a long time, which will greatly increase energy consumption.


2. Technology.

The technology referred to here is electric arc furnace steelmaking, which refers to the operator's skill. If the operator's skill is not good, it will waste a lot of lime and energy, which in turn will greatly increase power consumption.


3. Objective.

How do you understand that objective conditions can also lead to increased power consumption? For example, in the process of electric arc furnace steelmaking, we suddenly trip due to lack of electric energy. Over a long period of time, molten steel cooling and solidification need to be melted again. This process also wastes a lot of electric energy.


Free send inquiry to stella@hanrm.com if any needs.

Whatsapp/Wechat:+8615877652925

Email: stella@hanrm.com    stellarollingmill@gmail.com

Website:  https://www.hanrm.com

Electric Arc Furnace Steelmaking


没有评论:

发表评论

Featured Article

Minimizing Energy Cost in Electric Arc Furnace Steel Making by Optimal Control Designs

Minimizing Energy Cost in Electric Arc Furnace Steel Making by Optimal Control Designs The article is incomplete due to editor reasons, to d...

Popular Articles

About Me

Xian, Shaanxi, China
We are the manufacturer of Steel Rolling mills, Wire Rod Mills, TMT Rebar Mills, Electric Arc Furnaces, Flying shears, Continuous Casting machines, and spare parts. we can supply designing, manufacturing, installation and commissioning of the equipment with "turn-key" service. We can also design, manufacture and revamp other non-standard equipment according to the requirements of users. Free mail to Stella@hanrm.com for your rolling mill plant Solution  Whatsapp/Wechat:+8615877652925 https://www.hanrm.com/ https://www.electricarcfurnaces.com/ https://www.hanmetallurgy.com/ https://www.rollingmillmachine.com/

Electric Arc Furnace

Contact Us

名称

电子邮件 *

消息 *