2021年12月15日星期三

Main Application of High Carbon Ferrochrome

high carbon ferrochrome

Main Application of High Carbon Ferrochrome


Ferrochrome is an important raw material for the production of stainless steel. It is mainly used in the production of stainless steel, ball-bearing steel, tool steel, nitrided steel, heat-strength steel, quenched and tempered steel, carburized steel, and hydrogen-resistant steel. This is because chromium is in stainless steel. There is only one element that determines the properties of stainless steel, which is chromium, and each type of stainless steel must contain a certain amount of chromium.

The ferrochromium should be in block shape, and the weight of each piece shall not exceed 15kg, and the weight of the ferrochrome block with a size of less than 20×20mm shall not exceed 5% of the total weight of the ferrochrome. When the buyer has special requirements for the particle size, the supplier and the buyer shall negotiate separately.

There should be no visible non-metallic inclusions on the inside and surface of ferrochrome, but when the coating on the surface of the ingot is not clean, a small amount of it is allowed.

High carbon ferrochromium is mainly used in stainless steel production. The 200 series stainless steel contains about 16% chromium, the 300 series stainless steel contains about 25% chromium, and the 400 series stainless steel contains about 14% chromium. The 300 series stainless steel with high demand for ferrochrome is also a large proportion of stainless steel production.

Used as an alloying agent for ball steel, tool steel, and high-speed steel with high carbon content to improve the hardenability of steel, increase the wear resistance and hardness of steel; as an additive to cast iron, improve the wear resistance and hardness of cast iron, at the same time make cast iron have good heat resistance; used as a chromium-containing raw material for the production of silicon-chromium alloys and medium, low, and micro-carbon ferrochrome by the slag-free method; used as a chromium-containing raw material for the production of metallic chromium by electrolysis; used for oxygen blowing Method for smelting stainless steel raw materials.


Free send inquiry to stella@hanrm.com if any needs.

Whatsapp/Wechat:+8615877652925

Website:  https://www.hanrm.com

Smelting High-carbon Ferrochromium

More News You May Interesting:

What are the Advantages and Disadvantages of Blast Furnace?

Characteristics of Electric Arc Furnace Steelmaking

Walking Beam Reheating Furnace VS Push-steel Reheating Furnace

Why Intermediate Frequency Furnace cannot be Turned on Normally?

Featured Article

Minimizing Energy Cost in Electric Arc Furnace Steel Making by Optimal Control Designs

Minimizing Energy Cost in Electric Arc Furnace Steel Making by Optimal Control Designs The article is incomplete due to editor reasons, to d...

Popular Articles

About Me

Xian, Shaanxi, China
We are the manufacturer of Steel Rolling mills, Wire Rod Mills, TMT Rebar Mills, Electric Arc Furnaces, Flying shears, Continuous Casting machines, and spare parts. we can supply designing, manufacturing, installation and commissioning of the equipment with "turn-key" service. We can also design, manufacture and revamp other non-standard equipment according to the requirements of users. Free mail to Stella@hanrm.com for your rolling mill plant Solution  Whatsapp/Wechat:+8615877652925 https://www.hanrm.com/ https://www.electricarcfurnaces.com/ https://www.hanmetallurgy.com/ https://www.rollingmillmachine.com/

Electric Arc Furnace

Contact Us

名称

电子邮件 *

消息 *